Cookie Img

Fume Chamber

Fume Chamber
Fume Chamber
Product Code : 24
Product Description
We bring forth for our clients a complete solution for ventilation problems for laboratories with our finest quality fume chamber. The offered chamber includes devices like fume hoods, electrical service, ducts, plumbing options and base cabinets. These devices together provide a safer and effective fume hood for the laboratory. Moreover, our HMG metallic fume chamber are highly effective in protecting the operators from noxious matters when exposed to hazardous gases. Owing to this property of the chamber, these makes an important unit to be used in all laboratories. The skilled professionals design these range after extensive research and analysis with their skill of sound engineering and aerodynamic principles, which provides a smooth airflow into the fume hood to remove the fumes at sash openings.

Construction

Double skin sandwich construction

Upper unit

These are fabricated with prime CRCA sheet dully epoxypowder coated electro statically and inner chamber lined acid resistance other lining viz: PPGL or FRP; S. Steel/ Bisphenol are as optional at extra.

Sash

The sash used are made of polycarbonate clear sheet of 4 or 4.5 mm thick or laminated safety/toughened glass (optional at extra). These are framed for easy vertical movement by concealed counter weights that are operated by steel wire rope or cable. Also, the baffle at inside rear has been designed suitably as per application.

Services

No. of LPG or air/gas or vacuum provided( remote control operated)-Additional lines and service at extra

Illumination

A chamber is provided with vapor proof fitting of fluorescent tube light.

Electric Points

Industrial socket of 15 Amp provided in side chamber with switch provided on front facia

Design

Model with underbench storing provision for chemical storage/LPG cylinder

Exhaust System

Consists of centrifugal blower and ducting. The centrifugal blower are fabricated with PP or PPGL with FRP lining with a dynamically balanced impeller of polypropylene directly driven by 1 or 3 phase, CROMPTION or any standard make electrical motor. Exhaust blower of suitable CFM capacity is recommended to suit to the size of fume hood. A 15 ft long ducting included as Std. Supplies.
We bring forth for our clients a complete solution for ventilation problems for laboratories with our finest quality fume chamber. The offered chamber includes devices like fume hoods, electrical service, ducts, plumbing options and base cabinets. These devices together provide a safer and effective fume hood for the laboratory. Moreover, our HMG metallic fume chamber are highly effective in protecting the operators from noxious matters when exposed to hazardous gases. Owing to this property of the chamber, these makes an important unit to be used in all laboratories. The skilled professionals design these range after extensive research and analysis with their skill of sound engineering and aerodynamic principles, which provides a smooth airflow into the fume hood to remove the fumes at sash openings.

Construction

Double skin sandwich construction

Upper unit

These are fabricated with prime CRCA sheet dully epoxypowder coated electro statically and inner chamber lined acid resistance other lining viz: PPGL or FRP; S. Steel/ Bisphenol are as optional at extra.

Sash

The sash used are made of polycarbonate clear sheet of 4 or 4.5 mm thick or laminated safety/toughened glass (optional at extra). These are framed for easy vertical movement by concealed counter weights that are operated by steel wire rope or cable. Also, the baffle at inside rear has been designed suitably as per application.

Services

No. of LPG or air/gas or vacuum provided( remote control operated)-Additional lines and service at extra

Illumination

A chamber is provided with vapor proof fitting of fluorescent tube light.

Electric Points

Industrial socket of 15 Amp provided in side chamber with switch provided on front facia

Design

Model with underbench storing provision for chemical storage/LPG cylinder

Exhaust System

Consists of centrifugal blower and ducting. The centrifugal blower are fabricated with PP or PPGL with FRP lining with a dynamically balanced impeller of polypropylene directly driven by 1 or 3 phase, CROMPTION or any standard make electrical motor. Exhaust blower of suitable CFM capacity is recommended to suit to the size of fume hood. A 15 ft long ducting included as Std. Supplies.
Contact Us

HMG House, Plot No. 33 A, Parmar Techno Centre, N.H 8, Vasai Phata, Vasai (East), Vasai, Maharashtra, 401208, India
Phone :+919901269713